Special Coatings
CargoTherm – one-component, intumescent, water based paint especially designed for the passive fire protection of aluminium structrures on rail carriages.
Technical data sheet »
The following special coating products have been developed recently
- CARGO-DUR: Waterbased stoving enamel for aluminium pipes and lamellar heat exchangers.
- CARGO-PUR: thick-coat, keeps its elasticity right down to minus 45 degr C. Protects against stone chipping. Can be further reenforced with glas fibre for extra high impact resistance.
- CSS (Coating Sensor System): By integrating a printed film into the Cargo-Pur thick coat, a low voltage leak detection system results. Designed for transporters of hazardous chemicals, fuels, etc
Coatings for high vacuum metallization
- ERCODAL 2032 / clear glossy/: One-component, oxidative drying basecoat for the high vacuum metallization with excellent filling properties and brilliance. It shows good adhesion, even on solvent sensitive polystyrene substrates.
- ERCODAL 2036e / high-glossy basecoat /: One-component, oxidative drying high-glossy clear coat for high vacuum metallization on plastics parts. Fast drying and shows good adhesion on different type of plastic surfaces.
- RENGOPAL PRIMER 2052 / primer /: One-component, clear primer, it was developed especially for polyolefin substrates. Additional pre-treatment such as flaming is not necessary. After a short flash off time this primer is can be over-coated with various topcoats respectively basecoats for the metallization.
Lackspray
- Lackspray / silky-gloss enamel for sparying/: Heavy metal free, fast drying enamel for spraying, based on alkyd resin. Easy sprayable, good coverage, the dried film is hard, charaterized by good scratch and environmental resistance. Available in a wide range of shades / e.g. RAL colors
- Lackspray H / indicator spray paint /: Heavy metal free, fast drying spray paint based on alkyd resin. Easy sprayable, shows good adhesion and coverage, flexible and resistance to chemicals. Long-term effect of heat stress, over 240°C swelled areas appear as bubbles in the topcoat and the paint peels off. Available in black, grey and dark grey.
- Lackspray G / temperature sensitive primer /: Heavy metal free, fast drying primer based on alkyd resin. Easy sprayable, shows good adhesion and coverage. Long-term effect of heat stress, over 240°C swelled areas appear as bubbles in the primer film and it peels off. Available in black, grey and dark grey.